Birmingham Lathe YCL 1440GH

$0.00

  • 3 HP MAIN MOTOR
  • NO CHANGE GEARS REQUIRED
  • 16 SPEEDS FROM 45 – 1,800 RPM
  • D1-4 SPINDLE WITH 1 1/2″ BORE
  • 40 KINDS OF INCH THREADS FROM 4-112 TPI
  • REMOVABLE GAP BED FOR LARGE DIAMETER WORK
  • MAGNETIC CONTROLS AND SPINDLE FOOT BREAK
  • T-SLOTTED COMPOUND AND FRONT PULL-OUT CHIP TRAY
  • MAIN SPINDLE HARDENED & PRECISION GROUND
  • BED MADE OF FINE GRAIN HIGH TENSILE CAST IRON
  • BEDWAYS INDUCTION HARDENED & PRECISION GROUND
  • ALL GEARS AND SHAFTS HARDENED & PRECISION GROUND
  • MAIN SPINDLE SUPPORTED AT 3-POINT BY PRECISION BEARINGS
Category:

Description

ITEM / MODELYCL-1236GH

Capacities

MAX. SWING OVER BED14”
DISTANCE BETWEEN CENTERS40”
MAX. SWING OVER CROSS SLIDE8 5/8”
MAX. SWING IN GAP20”
EFFECTIVE LENGTH IN GAP6 1/4"
WIDTH OF BED8 1/8”

Headstock

SPINDLE NOSE (SPINDLE MOUNT)D1-4
DIAMETER OF SPINDLE THRU BORE1 1/2”
SPINDLE TAPER (WITH SLEEVE)M.T. #5 (M.T. #3)
SPINDLE SPEEDS45-1,800 RPM, 16 STEPS – 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM

Feeds & Threads

LONGITUDINAL FEEDS0.0012 – 0.0294” /REV. (40 KINDS)
CROSS FEEDS0.0003 – 0.01” / REV. (40 KINDS)
INCH THREADS4 – 112 TPI (40 KINDS)
METRIC THREADS0.45 – 7.5 mm (22 KINDS)
DIAMETER OF LONG. LEADSCREW7/8”
PITCH THREADS IF LONG. LEADSCREW8 TPI

Carriage

MAX. TRAVEL OF CROSS SLIDE7”
MAX TRAVEL OF COMPOUND SLIDE4”
MAX TOOL SIZE5/8” X 5/8”

Tailstock

DIAMETER OF TAILSTOCK QUILL2 3/4”
TAPER OF TAILSTOCK QUILL CENTERM.T. #3
MAX.TRAVEL OF TAILSTOCK QUILL4 3/4”

Weight & Motor

POWER OF MAIN MOTOR3 HP, 220V, 3 PHASE, 2-SPEED
POWER OF COOLANT PUMP1/8 HP, 220C, 3 PHASE
OVERALL DIMENSIONS (L X W X H )72” X 31 X 49”
NET WEIGHT, (LBS) APPROX.2,000

Standard Equipment

  • Follow Rest
  • 12” Face Plate
  • 3 3/4″ Steady Rest
  • 6” 3-jaw Chuck
  • 8” 4-Jaw Chuck
  • Operation and Parts Manuals
  • Coolant System
  • Halogen Work Lamp
  • Removable Gap
  • 4-way Tool Post
  • Thread Chasing Dial
  • Front Pull Out Chip Tray
  • Centers & Reducing Sleeve
  • Tool Kit with Tools & Leveling Pads
  • Full Length Foot Brake
  • Full Length Splash Guard
  • All inch/mm Dual Dials
  • Spindle Jog Button Control

Optional Equipment

  • 8” drive plate
  • Taper Turning Attachment
  • Quick Tool Changer
  • Micro Carriage Stop
  • 5-C Lever Type Collet Closer
  • Digital Readout Installed
  • Rotary Phase Converter

Reviews

There are no reviews yet.

Be the first to review “Birmingham Lathe YCL 1440GH”

Your email address will not be published. Required fields are marked *