More Features
- R8 Spindle
- 10″ x 54″ Table
- Step Pulley, 16 Speeds (8 Speeds FOR1Ć)
- High Grade Cast Iron Frame
- Box Ways on Y Axis & Z Column
- Hardened & Ground Ways
- Hardened & Ground Table
- Built-in Coolant Body
- Tilting & Rotating Head
- Chromed Ground Quill
- Hand & Power Spindle Feeds
- Power: 220V or 440V, 3Ć (220V, 1Ć)
| Item/Model | DL-26 | DL-32 | DL-40 |
|---|---|---|---|
| Max. Swing over Bed | 26" | 32" | 40" |
| Max Swing over Cross Slide | 13 13/16" | 20 1/2" | 28" |
| Max Swing in Gap | 31 1/2" | 39" | 48" |
| Width of Bed | 21 21/32" | ||
| Effective Length in Gap to Spindle | 16" | ||
| Effective Length in Gap to Chuck | 9 1/2" | ||
| Max. distance between centers | 60",80",120" | 160",200",240" | 60",80",120",160",200",240" |
| Headstock Spindle | |||
| Spindle Bore | 4 1/8" | 5 1/8" | |
| Spindle Speed Range | 7.5 - 1000 R.P.M. 7.5/10/13/18/23/31/43/56 75/100/132/178/240/310/420/575/740/1000 | ||
| Spindle Speed Numbers | 18 Steps | 18 Steps | 18 Steps |
| Taper of Spindle Center | M.T. No. 5 | M.T. No. 5 | M.T. No. 5 |
| Feeds & Threads | |||
| Longitudinal Feeds | 0.002-0.96 IPR,64 KINDS | ||
| Cross Feeds | 0.001-0.48 IPR, 64 KINDS | ||
| Inch Threads | 32-1/16 TPI, 73 KINDS | ||
| Metric Threads | 1-256 mm, 57 KINDS | ||
| Module Threads | 0.5-128mm, 57KINDS | ||
| Diametral Pitch Threads | 32-1/8 DP, 57 KINDS | ||
| Lead Screw Diameter/ Pitch | 2 1/4", 2 TPI | ||
| Carriage | |||
| Top Slide Travel (Max) | 7 55/64" | ||
| Cross Slide Travel (Max) | 17 1/2" | 19 13/32" | 20 7/8" |
| Longitudinal Rapid Travel | 7 55/64" | ||
| Cross Slide Travel, Max | 17 1/2" | 19 13/32" | 20 7/8" |
| 4-Way Tool Post Capacity | 1 1/4" x 1 1/4" | ||
| Tailstock | |||
| Quill Taper | MT No. 5 | ||
| Quill Travel | 9 1/2" | ||
| Quill Diameter | 3 15/16" | ||
| Motor | |||
| Main Drive Motor | 20 HP, 220/440v, prewired 220V | ||
| Coolant Pump Motor | 1/8 HP, 220/440v, prewired 220V | ||
| Rapid Traverse Motor | 1 1/2 HP, 220/440v, prewired 220V |
Standard Equipment
- Tool Box 1 Set
- Front Chip Guard 1 Pc
- Rear Chip Guard 1 Pc
- Draw Bar 1 Pc
- One Shot Lube
Reviews
There are no reviews yet.