CNC Milling Machine

Manual Milling Machines Specs, Tooling, Prices, and Ordering Form

To place an order or request a quote, simply check off the products of choice, fill out form below and submit.  A quote will be emailed to you same or next business day PST. 

Consider investing in a CNC Mills that is easy to operate, and will improve the productivity of your shop immensely! Be sure to view the VIDEO DEMO.

RF-31 MILLING-DRILLING MACHINE

ON SALE FOR $1024.00! HURRY WHILE IT LASTS! JUST EMAIL US FOR DETAILS!
CNC Manual Drilling Machine
  • This machine has several uses, such as surface cutting, drilling, milling, and also can be equipped with an electric switch for tapping.
  • This machine is of fine quality, can be operated easily, and it is not limited to skilled operators.
  • The drilling and milling operation can be performed by two methods:  hand operation, which makes quick drilling or worm gear feed operation, which makes slow milling.
  • Bronze adjustable nuts, which adjust the thread clearance and reduce the wear. 
  • Whole column which makes this machine strong, stable, and also keep the high accuracy.
  • Head of tough cast ensures its accuracy lasting and enduring through the treatment of precise boring cylinder, grinding, and internal stress relief.
  • To adjust belt and change speed, new pulley cover is easy to open the cover.
  • Great for the mass-production of small parts, research facilities, schools, shops, and even residential garages--turned into small shops for the guy who loves to tinker and design new ideas for the market.

Standard Features:

Drilling capacity .........................................1-1/4" 32mm
End mill capacity ...........................................3/4" 20mm
Swing.....................................................15-7/8" 405mm
Spindle nose to table (maximum)...................18" 480mm
Spindle taper............................................................ R-8
Diameter of Spindle sleeve................................ 3" 75mm
Head Swivel................................................ 360 degrees
Diameter of column.................................. 4-1/2" 115mm
Overall height (w/o stand)..................... 43-1/2" 1100mm

Machine Stand Height............................30"  760mm
Overall length........................................42-1/2" 1080mm
Overall width ........................................39-3/4" 1010mm
Motor power.......................................................... 2 HP
Spindle speed........................... 12 speed (120-3000rpm)
Forward/back table travel................................ 7" 175mm
Left/right table travel ......................................19" 485mm
Spindle up/down travel.................................... 5" 127mm
Working area of table............................... 28-3/4 x 8-1/4"
Net/gross weight....................................... 661 lb. 300kgs

Comes with...

  • One Year Warranty
  • Your choice in single phase 110 VAC or three phase 230 VAC
  • Comes with 3" U Type Angle Vise, JT6 Drill Chuck with Key and Arbor, 3" Carbide Tipped Surface Cutter with Arbor.
  • Found a better deal?  Let us know and we'll try to beat it, not match it!
RF-31 MILL-DRILL SINGLE PHASE 110VAC (WITH MACHINE STAND)
$1,215.00
RF-31 MILL-DRILL THREE PHASE 230VAC (WITH MACHINE STAND) $1,215.00
RF-31 MILL-DRILL SINGLE PHASE 110VAC
(WITHOUT MACHINE STAND)
$1,024.00 
RF-31 MILL-DRILL THREE PHASE 230VAC
(WITHOUT MACHINE STAND) 		$1,024.00


BIRMINGHAM BPS-1649C Vertical Knee-Type Milling Machine

NOW ONLY $3,655.00!
Birmingham Vertical Milling Machine
  • Birmingham Vertical Mills offer the best value, best features, engineered to meet the demands of modern machining practices.  These mills are crafted with world wide accepted proven designs.  This ensures years of reliable and dependable performance.  When it is time to perform routine service it's comforting to know Birmingham vertical mills are built to meet U.S. standards.

Standard Features:

  • High Quality Taiwan-made Mill Head
  • High Precision China-made Mill Body
  • Super Strong Column and Base
  • Low Maintenance Machine
  • High Precision Leadscrews
  • Satin Chrome Finished Dials
  • Built-In Coolant Column Base
  • Double Knee and Table Locks
  • Ram Equipped with Double Locks
  • Large Chromed Diameter Quill
  • One-piece Quill Pinion and Shaft
  • Spindle Head is internally cooled
  • High Precision Class 7 Spindle Bearings
  • Three Stage Power Downfeed w/Auto Stop
  • R 8 Spindle
  • 9" x 49" table
  • Step pulley, 16 speeds (8 speeds for single phase)  
  • High grade cast iron frame
  • Dovetail guideways
  • Ground table t-slots
  • Hardened & ground ways
  • Hardened & ground table
  • Tilting & rotating head
  • Hand & power spindle feeds
  • Power- 220V, 3 ph (1ph add $100.00 more)

Machine Specifications:

Table Size 9" x 49"
Table load capacity 600 lbs.
Table T-slot size 5/8" x 3"
Longitudinal travel hand only 35 1/2"
Vertical travel 16"
Ram travel 12"
Cross travel 13 1/4"
Quill travel 5"
Spindle taper R8
Head swivel RH/LH 90°/90°
Head tilting F/B 45°/45°
Ram turret swivel 360°
Spindle motor 3 hp 3Ø 16 speeds or 2 hp 1Ø , 8 speeds
Spindle speeds type step pulley
Spindle speeds (rpm) 90-5600(16 speeds)
90-2800(8 speeds)
Net weight 2250 lbs
Machine Height 86"
Machine Width (Front to Back) 68"
Machine Length (X Table, Handle to Handle) 67"

Comes with...

  • One Year Warranty
  • Your choice in speed
  • Tool box 1 set
  • Front chip guard 1 pc.
  • Rear chip guard 1pc.
  • Draw bar 1 pc.
  • One shot lube
  • Found a better deal?  Let us know and we'll try to beat it, not match it!
220VAC  three phase 16 Speed
$3,655.00
220VAC single phase 8 speed single phase $3,755.00 
  • Add Built-In Flood Type Circulating Coolant System with flex nozzle, pump, and on/off ball valve: 
$310.00 
  • Add PF-150X Taiwan 150 lbs Table Power Feed X Axis: 
 $450.00 
  • Add PF-150Y Taiwan 150 lbs Y Axis Block Power Feed: 
$450.00 
  • Add PF-150Z Taiwan 150 lbs Knee Power Feed: 
$450.00 
  • X, Y, Knee Power Feed Package: 
 $1,275.00 


Tooling and Accessories Packages:

TA Package 1 includes:
11 pcs R8 collet set # R8, 1/8” –3/4”
6 pc HSS 2-flute & 6pc HSS 4-flute end mill set# 8000-0001/0002
29 pcs Titanium drill bit set # 5000-0001T, 1/16” – ½” by 1/64
$199.00
TA Package 2 includes:
11 pcs boring tool set # 1001-0106
20 pcs Titanium end mills set 3/16-3/4”# 8000-0020
29 pcs Titanium drill bits set 1/16-1/2” # 5000-0001T
$210.00
TA Package 3 for includes:
6” precision vise with swivel base# AV-6
11 pcs R8 collet set # R8 , 1/8” – ¾”
52 pcs clamping kit # CK-52
11 pcs boring tool set # 1001-0106
20 pcs Titanium end mills set 3/16-3/4”# 8000-0020
29 pcs Titanium drill bits set 1/16-1/2” # 5000-0001T
$445.00
Mill Package 6 for Manual Knee Mill only includes:
Mitutoyo (Japan)  DRO # KA , 2 axis X/Y
table power feed # PF-150X, x axis
6” precision vise with swivel base # AV-6
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$1,599.00
Mill Package 7 for Manual Knee Mill only includes:
Newall (England) DRO, 2 axis X/Y
table power feed # PF-150X, x axis
6” precision vise with swivel base
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$1,750.00
Mill Package 8 for Manual Knee Mill only includes:
Acu-Rite (USA) DRO, 2 axis X/Y
table power feed # PF-150X, x axis
6” precision vise with swivel base
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$1,599.00
Mill Package 9 for Manual Knee Mill only includes:
Newall DRO, 3 axis X/Y/Z( Z on quill or column)
table power feed # PF-150X, x axis
6” precision vise with swivel base
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$2,150.00
Mill Package 10 for Manual Knee Mill only includes:
Mitutoyo DRO , 2 axis X/Y
table power feed # PF-150X, x axis
table power feed # PF-150Y, y axis
table power feed # PF-150Z, z axis
6” precision vise with swivel base # AV-6
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$2,275.00
Mill Package 11 for Manual Knee Mill only includes:
Newall DRO, 2 axis X/Y
table power feed # PF-150X, x axis
table power feed # PF-150Y, y axis
table power feed # PF-150Z, z axis
6” precision vise with swivel base
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$2,599.00
Mill Package 12 for Manual Knee Mill only includes:
Newall DRO, 3 axis X/Y/Z ( Z on quill or column )
table power feed # PF-150X, x axis
table power feed # PF-150Y, y axis
table power feed # PF-150Z, z axis
6” precision vise with swivel base
11 pcs R8 collet set # R8, 1/8”- ¾”
52 pcs clamping kit # CK-52
$2,975.00

CHECK OUT THE CNC Jr. MILLING MACHINE TO SEE IF THIS MAY BE A BETTER CHOICE FOR YOUR INVESTMENT BEFORE ORDERING YOUR RF-31 MILL DRILL.

CNC Jr. Milling Machine Preview

CHECK OUT THE CNC SUPRA MILLING MACHINE TO SEE IF THIS MAY BE A BETTER CHOICE FOR YOUR INVESTMENT BEFORE ORDERING YOUR BPS-1649 Knee Mill.

Supra Milling Machine Preview


Found a better deal?  Let us know and we'll try to beat it, not match it!

SHIPMENT QUOTE for RF-31 Mill-Drill:

 

Place a check if delivery requires a truck with a lift-gate to lower freight to ground level in U.S, (a no loading dock delivery)......$100.00

 

Place a check if this is a residential delivery in U.S.............$50.00
 

U.S. Continental Shipment is done by freight.  Total shipping charges will be displayed on your formal quote.  Approximate costs for freight shipment from Southern California to anywhere in Continental U.S. will range from $145.00-$295.00.

 

International Sea Freight to nearest sea port approximate charges are $285-$450.00  Shipment by sea 4 to 6 weeks.   

400-$850.00.

 

Check here if you would like to arrange for pick up: 

Last Step:  Complete Order Form Below:

SHIPMENT QUOTE for BIRMINGHAM Vertical Knee Milling Machine: 

 

U.S. Continental Shipment is done by freight.  Total shipping charges will be displayed on your formal quote.  Approximate costs for freight shipment from Southern California to anywhere in Continental U.S. will range from $400.00-$850.00.

**Fork-lift is needed to lower machine from truck and placed at desired location.**

For Residential Delivery--contact your local machinery moving company with details to transport the machine and place at your residence.  We can ship the machine to the machinery moving company for you. 

 

International Sea Freight to nearest sea port approximate charges are $450.00-$1,250.00  Shipment by sea 4 to 6 weeks.

 

Check here if you would like to arrange for pick up:    

 

Last Step:  Complete Order Form Below:

Please see our Terms & Conditions regarding sales.

ORDERING FORM:

Check off your preference for FORM OF PAYMENT:

 

Cashier's Check or Money Order, order will be processed immediately

Personal Check or Company Check, order will be processed upon check clearance

Major Credit Card:  Visa, MC, AmeX, requires a 3% surcharge and order will be processed immediately (U.S. orders Only)  

Wire Transfer with a $40.00 surcharge, order will be processed upon bank confirmation.  (Best form of payment for International Orders.)


Requested by: 
Company Name:
Shipping address:
City:
State:    (Sales tax 8.25% for residents of CA only.)
Zip-code:
Country:
Phone:
Fax:
*E-mail: *required
*Please be sure to include your fax number and email address on this order form.  A formal quote will be emailed to you today or next business day PST. 
   

Found a better deal?  Let us know and we'll try to beat it, not match it!

 

For special requests, questions, or comments, please type in your message in the comments box:
 

How did you find our web site?

  • Google search 

  • Yahoo search 

  • Thomasnet.com  

  • other web search engine,  please specify:

  • magazine display ad 

  • word of mouth 

After you press the "Submit Order Form" button below:

We will fax or email you a formal quote complete with shipping charges.  Once you receive your invoice, sign it, and fax back to us if you wish to pay with credit card.  Then call us at 1-877-CNC-8895 or 1-626-812-8300 during normal business hours PST to complete credit card transaction over the phone.  We accept major credit cards:  Visa, MasterCard, & American Express over the phone for your security.  Wire Transfers can also be made for International Orders.  If you choose to pay by Cashier's Check, Money Order, or Company/Personal Check, please mail the formal quote agreement along with check to:  CNC MASTERS, 738 N. Loren Ave, Unit 1, Azusa, CA  91702  USA.  Upon check clearance, allow one-two weeks to ship out your freight from our factory.  Checks payable to:  CNC MASTERS.

By placing a check here, I state that I have read, understand, and agree to the Terms and Conditions regarding this sale. 

CONSIDER THIS ALTERNATIVE:

For a FEW thousand dollars more, consider the freedom of not having to manually machine your parts for hours on end creating stress on the back, arms, and wrists---an investment that will payoff in the long run with the power of automation technology all at the touch of your computer.  Why not improve the productivity and precision of the milling machine by allowing your computer machine your parts for you all at the touch of the keyboard.