CALL TOLL FREE
(877) CNC - 8895
626 - 962 - 9300
Click on a CNC Machine image for more info...

Prices / Order Now >> CNC 1340 Lathe Catalog/Quote

CNC 1340 Lathe Catalogue

cnc_12340_Lathe

True 2 Axis with Computer Variable
Spindle Encoder Control for :
$8,499.00

This CNC Lathe will instantly revert back to its manual capabilities eliminating the need to write a CNC program for short runs. Its advanced CNC capabilities can turn any complex turning application into a simple one that can be programmed and executed accurately many times over on production runs.

The CNC MASTERS 1340 Lathe is a Gear Head Bench Top mid-size turning center made for primary or secondary CNC machining applications. This 1340 lathe is intended for the user needing the ability and performance of a true CNC working lathe without taking up floor space like larger, expensive CNC machines which require highly skilled trained CNC machinists and service techinicians to tune and maintain the machine for you. Turn, face, chamfer, or machine threads on your part with this CNC Lathe. You can machine just about any application within 13” on the swing or 8" over the cross slide, and 35.25” on the carriage travel.

THE CNC MASTERS 1340 Lathe Turning Center IS TESTED FOR QUALITY AND PERFORMANCE IN-HOUSE IN IRWINDALE, CA USA.

Add protective sliding splash guard for $285.00 more.

 

 

DEMO Coming Soon
Product Info

 

CNC Lathe 1340, Deluxe Package

Lathe_1340_Left

CNC MASTERS 1340 Lathe: Recommended for general turning, chamfering, facing, boring, inside thread and outside thread. Built-In Turn-Key CNC system for true 2 axis X and Z control with computer variable spindle encoder control and safety limit switches. X and Z axis ball screws with pre-loaded ballnuts and motors installed as direct drives. The user-friendly windows Master operating software is included with user's manual. Standard 1340 lathe items also included: Motor Pulley, Backplate for Three-Jaw Chuck, Backplate for Four-Jaw Chuck, 3-Jaw Scroll Chuck, 4-Jaw Independent Chuck, Center Sleeve Bushing MT-5 to MT-3, Change gear for threading (needed for manual option threading only), Tool Post Wrench, 4 Way Tool Post, Steady Rest, Follow Rest, Faceplate 11.75", Machine Stands with Center Kick Plate and Chip Pan. One Year Warranty. Life-long tech support for as long as company owns this equipment. Power requirements: 115vac for controller. 208, 220-240vac, single phase for spindle motor.

Accessories include:
Removable Sliding Splash Guard with Lever Locks,
Wedge-Type Quick Tool Change Tool Post on machined T-Nut with 5 holders,
Computer Control Coolant Pump with hose, container, and flex nozzle,
and our exclusive Hand Held Remote Lathe Control Joystick with feed, speed, jogging, and micro-positioning.

Full Description& Specs .......................................................$9,695.00

 

CNC Lathe 1340, Base Machine

Lathe_1340_Right

CNC MASTERS 1340 Lathe: Recommended for general turning, chamfering, facing, boring, inside thread and outside thread. Built-In Turn-Key CNC system for true 2 axis X and Z control with computer variable spindle encoder control and safety limit switches. X and Z axis ball screws with pre-loaded ballnuts and motors installed as direct drives. The user-friendly windows Master operating software is included with user's manual. Standard 1340 lathe items also included: Motor Pulley, Backplate for Three-Jaw Chuck, Backplate for Four-Jaw Chuck, 3-Jaw Scroll Chuck, 4-Jaw Independent Chuck, Center Sleeve Bushing MT-5 to MT-3, Change gear for threading (needed for manual option threading only), Tool Post Wrench, 4 Way Tool Post, Steady Rest, Follow Rest, Faceplate 11.75", Machine Stands with Center Kick Plate and Chip Pan. One Year Warranty. Life-long tech support for as long as company owns this equipment. Power requirements: 115vac for controller. 208, 220-240vac, single phase for spindle motor.

Full Description& Specs .......................................................$8,499.00

 

CNC Milling/Lathe Machine Deluxe Combo Deal

Lathe_1340_Left CNCSURPA_RIGHT CNCBARON_RIGHT
Add any of the following CNC Masters milling machines to your CNC Lathe Deluxe Package for a bundle combo package deal:

CNC Supra Milling Machine Deluxe Package at listed price. Take off $850.00*!

CNC Baron Milling Machine Deluxe Package at listed price. Take off $475.00*!

CNC Jr Milling Machine Package A, A1, B, or B1 at listed price. Take off $300.00*!

*This combo package "only" applies to the above package deals and cannot be combined with any other offer. This deal "only" applies to the combined purchase of mill and lathe at the "same time." There are no substitutions.

CNC Accessories

Quick Change Tool Post

Wedge-type Quick Tool Post with 5 holders Set. Quickly change out your cutters while retaining the cutter edge at the center of your stock. No more need to shimmy and properly align your cutters to the center of your stock with this Quick Change Tool Post. The kit comes to you with a block that you will need to machine into a custom T-Nut to fit the size of your T-Slot.....$395.00.

$395.00

Lathe Hand-Held Remote Control including joy stick control, spindle and feed controls, high resolution micrometer handle, go and panic buttons.  Allows you to jog your two axes by hand without using your computer keyboard.  Easily align your initial home position or quickly turn or face a simple part with the joystick.

$485.00

Sliding Splash Guard which can easily be removed or locked into place with two built-in levers. Keep debris and splash enclosed during your CNC lathe operation. 28" long, and plenty of space for parts on a 13" swing.

$285.00
Computer Control Coolant Kit. Keep your cutters from quickly dulling out. Keep debris from welding on your cutters with coolant control. You can operate coolant on/off or through M-codes on the Master operating Software. This system comes to you with a pre-drilled hole and strainer mounted at the center of your chip pan. Also included: funnel, hoses, container, magnetic base with flex nozzles, and submersible pump
$235.00

SOFTWARE PACKAGES:

Item
Description
Price
Visualturn 1.0

Visualturn 1.0 This new offline programming system is used to program 2-axis CNC turning centers or lathes. Includes powerful turning machining methods to handle complex programming tasks. Just as in VisualMill, the easy interface, allows a user to machine a part in very short time. One of the best value packed lathe products available today. Available file imports include: IGES, Rhino, STEP, Dxf, Dwg, STL, VRML, RAW, Point Cloud. Packed with sufficiently powerful manufacturing methods, easy to use package is not only effective but also attractively priced for the budget conscious or entry level buyer.

Use this CAM software with popular drawing softwares such as Solidworks, RhinoCAD, and AutoCAD.

CALL OR
EMAIL
US FOR PRICING. VisualMill 6.0
Rhino 4.0
RHINO 5.0 "CAD" Software features a 3-D modeling system that can create, edit, analyze, and translate NURBS curves, surfaces, and solids in Windows. VisualMill can read Rhino's native format files (.3dm) directly (without translation) and generate cutter paths accurately and efficiently, ensuring 100% direct translation capabilities. (Definitely one of the best CAD programs in the market today! Easy to learn and use--and design the intense detailed parts.)
WE ARE WILLING TO COMPETE IF YOU FIND A BETTER DEAL.


CALL
OR
EMAIL
US FOR PRICING
.



Quotation


View Quote Cart!

Need Financing?


Contact CNC Masters

CNC Masters
16031 Arrow Hwy. Ste. J&K
Irwindale, CA 91706
Toll Free Phone: (877) CNC-8895
Phone: (626) 962-9300
Fax: (626) 962-9330
E-Mail: sales@cncmasters.com